Springs are the wrong length. The front are close to stock, but leave little room for lowering. The rear are much lower and i had to raise the shock to the limit, as i lowered the front to the limit. It suits me ok as i need the clearance to get up my driveway, but if you wanted it lower you would need to buy lower front springs and you can only get 40mm lower. Brake line and wheel sensor brackets are 10-20mm too high, the lines are a bit tight. The front bracket for the swaybar is a channel facing forwards, so you cant get a spanner on the nut to tighten it, i had to use washers to pack it out. BC you can easily fix these problems.