I bought the 7" LED Headlight + 4.5" Fog Passing Lights With Bracket Ring + Front And Rear LED Turn Signal Lights For Harley Touring Models for my 2002 Ultra Classic Electra Glide. The first problem that the kit came without any instructions or documentation. The second problem was installing the front turn signals. Each of the front turn signal lamps has three wires. There is no documentation to help match the color-coded lamp wires to the color-coded wiring harness wires to which they must be attached. Since there are six possible combinations, I tried each and found the right combination on the fifth try. The Third problem was intense static noise in the radio when the kit's lights were on. I traced it down to the headlamp after about eight hours of diagnosis. A support person told me I needed to buy the LED Wiring Harness Canbus kit. It is my belief that the LED headlamp should be made with the circuitry already included, or at least some documentation which would have saved me all of the diagnostic work. In order to get one Canbus circuit, you have to buy a pair of them, which seems unreasonable.