I have the heavy duty pallet forks with hay spears and steps to get into equipment. So far I have about 2.6 hours of use getting 8 skids of wood pellets and 1 round hay bale moved so far. When using the forks which I believe are 60 inches long, I used them to move the wood pellet skids around, while moving the first skid to get lined up to remove from the trailer I was having a tricky time lining both forks up. Upon looking at it in more detail figured out the metal bar that holds the forks on the right side bent out causing the forks to be uneven. I noticed this during our first use, had to use a 3 pound hammer to get the fork to move off of the bent location just to see what was going on. I am glad that it did not bend the rest of the way forward while we were moving wood pellets, since that could have been fatal and they could have fallen on one of us while we were getting them off the trailer. I really need to get back part replaced it said it was rated for 5k, but the wood pellets are only 2k plus the weight of the skid which is about 77 pounds. It makes me wonder if the the steel was just softer or the tensile strength where the pressure of the forks was at the right side is weak from the factory. My tractor is designed to lift 4k pounds so it should be good with the unit as well. It's a Rual King 55 unit with backhoe and front loader. Please help us get this part replaced with a safe unit.