Sliding Gate Opener - AC1400 - Accessories Kit - ACC3 Reviews

4.5 Rating 206 Reviews

This chain-driven sliding gate opener is designed with a 120V AC (3/4 HP equivalent) motor. It provides exceptional starting torque and continuous operation, and can be used for most applications. It opens gates weighing up to 1,400 lbs or 40 ft. in length (a 20 ft. chain is included; if your gates are more than 20 ft in length then you can purchase an extra chain). Additional accessories are included: (1) Photocell Sensor; (1) Wired Push Button; (1) Metal Box for Keypad; (1) Wireless Keypad with Backlight
Features:
Opens gates weighing up to 1400 lb or 40 ft. in length
Built-in radio receiver
Two remotes included
User programmable and user erasable remote codes
Wireless keypad included
RF hopping code technology prevents your remote code being accessible to others
Auto-close feature
Power Supply: AC 120V
Operating Time: 0 - 44 seconds
For your safety, this model will stop and reverse if it encounters an obstruction on closing and stops when it encounters an obstruction on opening
Manual key release design for emergency purposes
Pedestrian mode
Single Phase Motor

UPC: 648236985571

About ALEKO:

ALEKO Products was established in 2005, as a small family owned business, located in Seattle, Washington. From that time, our store has gradually grown and has now newly expanded to Canada. It is an easy, one stop shop to access all of our unique varieties of products.

Visit Product Page

Phone:

833-926-2323

Email:

petr.strizheus@aleko.com

Location:

8307 S 192nd St,
8307 S 192nd St
Kent
98032

Visit Product Page

“I give the Aleko AC1400 a 5 star rating. I got it installed fairly easy, had a little problem with the Magnet switches but I overcame the problem and I am very satisfied with the installation and the product.”

Helpful Report

“Works great when working. Very convenient . But sometimes the remotes don't work when on the other side of the gate when you want to come back in. My back gate opens to the school my child goes to. When the gate doesn't open. She is forced to walk around the block to get home. Otherwise, My gate is very heavy and the motor is very strong. Opens smooth and with ease.”

Helpful Report

“It's good for its price and the customer service isn't bad neither. I had some problems but the customer service helped resolved it. Now it works well!”

Helpful Report

“I just finished installing one of these gate openers and I must say it was straight forward and easy for the most part. I must say though there are a few things I didn't like to be honest.1. I would not use the intended anchoring bolts as I think they are too tiny and feeble. I made an 18 inches deep by 12 inches wide solid concrete platform for the the motor. I used 3/4 inch expansion bolts.2. The bolts that should be used to install the magnet brackets are only threaded half way on the bolt, which makes it difficult to tighten them 100%.3. The adjustment but on the back of the magnets should be way longer. However in this case they worked very well.4. My biggest problem with this product was the instructions. OMG this is the definition of vague. First off there truely is an error in the manual and only a technical person would realise it or else spend days if not weeks not realising the error. In my case the motor was attempting the opposite direction which the manual attem”

Helpful Report

“Installed the opener on a 22 ft roller fence. Had to buy some extra chain but that was easy to find at Harbor Freight. They had it installed in 1 day. It doesn't like to work if it's REALLY cold out but who does! :) Other than that it performs well.”

Helpful Report

“this sliding gate opener is a bargain I installed one in my house, and has been working great after a year, real easy to install and almost everything to install it, I defenetely recommend it.”

Helpful Report

“It's a little slow, at moving the gate. You should look at the power, and purchase the power for your need.”

Helpful Report

“If you engage and disengage, make sure that when you disengage you don't over-do-it. If you disengage the motor with the tool provided, only go a couple of turns or until gate disengages. Otherwise, bolt inside will break.”

Helpful Report