Sliding Gate Opener - AC1400 - Basic Kit Reviews

4.6 Rating 282 Reviews

PRODUCT DESCRIPTION:
This chain driven sliding gate opener is designed with a 120V AC (3/4 HP equivalent) motor which provides exceptional starting torque and continuous operation, making it perfect for most applications. It opens gates weighing up to 1,400 lbs or 40 Ft in length (20 ft chain is included; if your gates are more than 20 ft in length then you can purchase an extra chain in " Chains" section).
FEATURES:
Opens gates weighing up to 1400 lb or 40 Ft in length
Built-in Radio receiver
Two Remotes included
User programmable and user erasable remote codes
RF hopping code technology prevents your remote code being accessible to others
Also comes with an Auto-Close Feature
Power Supply: AC 120V
Operating Time: 0 - 44 seconds
For your safety, this model will stop and reverse if it encounters an obstruction on closing and stops when it encounters an obstruction on opening
Manual key release design for emergency purposes
Pedestrian mode
Single Phase Motor
UPC 013964717334

About ALEKO:

ALEKO Products was established in 2005, as a small family owned business, located in Seattle, Washington. From that time, our store has gradually grown and has now newly expanded to Canada. It is an easy, one stop shop to access all of our unique varieties of products.

Visit Product Page

Phone:

833-926-2323

Email:

petr.strizheus@aleko.com

Location:

8307 S 192nd St,
8307 S 192nd St
Kent
98032

Visit Product Page

“Rockin ,hope it lasts 10 years at least,using it to move 20' gate 6' tall with a 14'' bandsaw blade on top as the entrance to my fort.”

Helpful Report

“I've had this unit installed for a few weeks now and so far I am more than happy with it. Does everything very well. I've installed the auto stop magnets for opening and closing points and they work perfect. Remote keychain unit works great...I've ionly tested the range of this remote to about 50 feet and they both worked well. So far, I'm very impressed.”

Helpful Report

“I purchased this opener to install in my 30'X 6' metal gate and it works really well but not after I have to alter the metal base where the gear box and motor is attached. The construction of the mount is so far out that when you assmble it and try to disengaged the motor to operate it manually it be very hard to push the gate so I have to realligned the unit by putting shimms under the motor base and the gear box ounced it's all alligned it works great.”

Helpful Report

“I first purchased this unit in Sept, 2011 and installed it with minimal problems. The instructions were OK but leave some minor doubts during the procedure. Eventually it worked well and performed as desired. In April it ceased working and I contacted the distributor who offered little to no assistance. The circuit board seemed to be the problem but they were mum on any warrantee. I called Amazon and they did some research, then offered to fix the problem by shipping me a NEW UNIT! I replaced the dead circuit board (actually just swapped the entire new unit) and now all is well again. The gate opens easily in the rain, snow and heat and my spouse is very happy.. Life is good. I am a very satisfied customer!”

Helpful Report

“I enjoyed this product, it arrived on time and is was well labels with plenty pictures and instructions. these were helpfull for assembly. thanks for this pruduct.”

Helpful Report

“we will see, like i said it arrived damaged . being a contractor i have had little to no problem putting together . the instructions on the assembly are very poor. This unit is not for the "do it your self person".”

Helpful Report

“I was planning to make a sliding gate drive out of an old reversible drill and several bicycle chains until I found this operator. The price is hard to beat; I guess i would pay the same for parts for my dyi project. It's a dedicated kit, with options for expansion and numerous pieces of hardware intended to fit miscellaneous gates that I might have. Much better than anything i would build myself from a scratch. The gate needs to be stiff enough to take the chain tension, in my case 2" square pipe was enough. Of course, with accordance to Murphys laws, the fittings didn't fit my gate, because of the intervening midstile, but several cantilevered pipes cut and welded together allowed for installation and proper positioning of the chain and magnets on my gate. I poured the concrete foundation (2 bags 80lbs) with embedded bolts and placed metal conduits to the additional circuit breaker. The drive base was welded in place to avoid theft. The drive operated once energized; there”

Helpful Report