Amped Custom High Pressure Line | HPL | Tippmann or Storm Reviews

4.1 Rating 44 Reviews

Amped HPL Line is a large bore line for your HPA gun (Tippmann or STORM InGrip ONLY) that is both flexible and durable. It is enclosed in a nylon sheathing that will not affect it's flexibility but will help protect it from damage.

WE DO NOT OFFER CUSTOM LENGTH ON LINES. Currently this line is available in 36" and 42".
We offer the outer sheathing in multiple colors to suit your loadout.

Our HPL comes with Slide Check that has an 1/8" NPT threaded fitting at one end (at the UFA) and a female/coupler quick disconnect fitting and Slide Check on the other end.

Each line is tested after being assembled. This line is designed to withstand some serious milsim gameplay.

Max operating pressure for this line is 1,000 PSI; Burst pressure is 3,000 PSI.
This line is not recommended for CO2 use.

CALIFORNIA PROPOSITION 65WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Visit Product Page

“When I first received the line, I was already disappointed because it’s hardly usable with how stiff it is. Secondly it didn’t take long for the seal where the bottle connects to go bad, and just start leaking, but the leak was not severe so some electrical tape did the job for a while, but the leaks is definitely worse now, and today the line was rendered useless as. Now it just sprays out air uncontrollably from the female end of the line. Amped if you seeing this. Please reimburse or at least get a replacement.”

Helpful Report

Posted 1 year ago

Hello, Please email us - sales@ampedairsoft.com and we can get you a replacement line. Our lines have lifetime warranty. Thanks and looking forward to helping you out with this!

Posted 1 year ago

“First of all, this line is way to stiff you and just wraps itself in circles that are super difficult to get it out of. Secondly this thing leaks everywhere and pretty much have had problems with it leaking from the beginning of using it. Not only does it leak from where it connects to the the bottle but at the female end too. This thing literally sucks, go buy the thinner tippmann one. That one is definitely my favorite out of the 3 different hoses I’ve purchased. It’s also miles cheaper”

Helpful Report

Posted 1 year ago

Hello, Please email us - sales@ampedairsoft.com and we can get you a replacement line. Our lines have lifetime warranty. Thanks and looking forward to helping you out with this!

Posted 1 year ago

“I have purchased the IGL and this product for my Tippmann rifles, apparently they don't work in weather colder than 5 degrees Celsius, which is a shame as it wasn't advertised as that. Same as other people in the reviews, they decided to start leaking where they rotate, so there's no fix. Ruined a good Sunday game for me.. Product definitely not worth it and I had to back to a different option that has proven to work in much colder environments.”

Helpful Report

Posted 1 year ago

Thank you for leaving your review and sorry to hear you are having issues with your HPL. We have been noticing that extreme colder temps do sometimes affect the HPLs due to the higher pressure with them and rubber shrinkage, however haven't had a lot of customers report this to us. Perhaps we don't have many players using the HPL in extreme cold haha. Typically leaks like this could be due to the crimp, however, in your case may be exacerbated by the very cold weather vs other moderate weather. We have had crimps go back after longer periods of us and when the HPL is being rotated frequently from use. IE: we just had a customer who is reporting leaking after his HPL was used for the last 5 years. We stand behind our products and can definitely get this taken care of for you. We can either send out a replacement to try in hopes that this one is just a fluke with this specific line and the cold weather or we can refund the line for you. Please let us know what you would like to do and we can get you all squared away.

Posted 1 year ago

“I've seen many people dealing with Tippmann lines leaks and even breaking off during the game, It's either the line or the fitting that breaks off just cause the lack of flexibility. I've never ever had an issue with these lines. They are the best. Just got another Tippmann and here I'm getting another line for it. I wouldn't trust any other line.”

Helpful Report

Posted 2 years ago

Hey there, Sebastian Thank you so much for the kind words man, our production people work super hard to make sure these can withstand the trials that airsoft puts it through. Hopefully we can continue to fuel your airsoft adventures. Thank you, Apple

Posted 2 years ago

“Used it for a wolverine aero wrath regulator stock so I can just keep one tank hooked up to the UFA all the time for at home tuning etc. That way I can just screw in the ASA w/ fill nipple adapter and just plug this right on. Works great, absolutely no leaks. As an added bonus I can use run the 68/4500 tank through the aero wraith stock and keep that compactness if the 13/3000 tanks that go onto the wraith stock run out in a long game play.”

Helpful Report

Posted 2 years ago

“This line is amazing. The tippmann M4 has always been a struggle to find a good, quick release line for, and this line has solved this problem. Great construction and the slide check is a great feature. Couldn't be happier with my purchase.”

Helpful Report

Posted 3 years ago

“Got a line from them 2 years ago.. never used it doing to deployment with the army first time i try it was leaking bad and when i turned on the air up to full it blew open -.- BUT!! i looks really good and feel great”

Helpful Report

Posted 3 years ago

Carlos, Oh man! Sorry to hear that! That is very odd that the fitting failed there. Typically we see this when pressure is applied to the barb fitting, such as tightening the tank down really hard or accidentally hitting it, however that was not the case with you. Your line is under a lifetime warranty againsts defects and this falls under that. It appears that your fitting may have been defective. (They are cast and mass produced, so that is completely possible). It's rare that we see this, but that is not a problem and we will gladly replace this for you free of charge. Please simply reach out to us with your order number and we can get that rolling for you! Sorry for the bummer on this specific product, but we are here to fix it for you! We will look forward to hearing from you and getting this resolved asap. Thanks!

Posted 3 years ago

“Got a high pressure line a few years ago and haven't played doing to being deployed with the Danish army.. so this weekend i tried out the line for the first time.. as soon as I put it on the botted it was leaking a little bit and when a cranked up the air the line blew up..”

Helpful Report

Posted 3 years ago