Wolverine Airsoft WRAITH CO2 Stock | HPA CO2 Stock Reviews

4.3 Rating 4 Reviews

Tired of having a line on your HPA Rifle? Check out this self contained Wolverine Airsoft WRAITH CO2 Stock that replaced your stock tube on your M4! The Wolverine Airsoft Wraith CO2 Stock allows you to have the performance of an HPA rifle without the line. One of the biggest push backs in the sport about HPA is the need to carry around a tank or having a line coming from their gun. The Wraith CO2 stock eliminates this by concealing a 12 gram CO2 cartridge within your stock/buffer tube. Wolverine Airsoft plans on starting to ship the WRAITH CO2 stocks on Monday August 22nd. We will begin shipping these shortly after once they are checked in. Orders will be shipped on a first come first serve basis. Pre-orders will be shipped first. The WRAITH CO2 Stock allows 180-200 shots per 12g CO2 Cartridge at normal PSI limits. Please keep in mind that the lower the PSI, the more shots you will have. The higher the PSI, the less shots you will have.

Visit Product Page

“I’ve had a wraith for a couple of years running through a gen 1 Redline N7m engine on an M4. I started out with it as the stock 12g setup. It did as described my Wolverine, and shot about 200 +/- rounds per 12g cartridge. I then found the 33g adaptor. I can run about 600 rounds +/-. I found the system much more useable in the field with the 33g cartridge. It can be difficult to get the end cap set just right to puncture the 12g. If you don’t get it correct, the cartridges will discharge while you try to twist the cap. They make it look easier than it is. It can be done, and it took me a few cartridges to get it right. With the threaded 33g cartridge, It’s just a twist on. I wonder why they haven’t made it work with the 88/90 gram cartridges? If you are going this rout, do the 33g upgrade. Don’t bother with the 12g cartridges. The other thing to consider is there is not a tournament lock on this unit. You will either have to figure out how to make one yourself( I did this with a pop can and zip ties), or use a ‘tamper proof sticker’ as the MFG suggests. In the end, I found the product was good, but ended up taking it off for the P* UGS.”

Helpful Report

Posted 2 years ago

“I installed the Wraith CO2 Stock on my M4 with a Wolverine Airsoft REAPER V2 / M4 Spartan Edition and I really enjoyed the result. With 380 FPS measured with BB's of 0.20 I achieved on average 120 shots with a CO2 cylinder, which I consider to be satisfactory. As I often do not use full auto and I play more often in CQB is perfect in my opinion. I installed and adjusted the Wraith and Reaper myself and I did not find it difficult, I followed the instructions on the Amped and Wolverine videos and I had no problems. I recommend that if you do not have the knowledge and tools needed to do the installation you take to specialized shop to do the installation. I have a Tokyo Mariu VSR-10 G Spec with Wolverine Airsoft - BOLT System with Wolverine Airsoft - WRAITH CO2 Adapter installed and the result was excellent as well. All products were purchased at Amped, thank you very much Amped for the great service and fast shipping. Many thanks Amped and hugs from Brazil !!!”

Helpful Report

Posted 5 years ago

“I shoot semi-auto only, not an HPA-speed softer so there's no reason to use a tank. Setting it up was a little tough but once it works, it's amazing. Great consistency and reliably punctures CO2 capsules. Idk why the guy reviewing gave it a 3/5 just because it doesn't like other brands parts, use Wolverine everything and you won't be disappointed.”

Helpful Report

Posted 7 years ago

“the Co2 stock is an amazing idea removing the need for a tank and a line always linking you to your RIF, however I purchased the Wraith Co2 stock with the ProTech mk2 HPA engine, now the idea behind this is as follows the ProTech was stated to be the best air efficient HPA Engine on the market the wraith is rated to be able to shoot just over 200 shots on Co2 Capsule when I first set it up I was able to get just over 300 shots out of one Co2 Capsule and that’s where the problems then started as the Co2 runs out the pressure with the HPA engineers decreases mean there isn’t enough pressure to force the nozzle closed meaning when you slam the next Co2 capsule in all the Co2 is then released out the front. Over all awesome product if you are running only wolverine parts (don’t know how it work with p* or mancraft ect) but for my needs didn’t work how I planned I will give it 3 stars as I really do like the idea of the Co2 Stock”

Helpful Report

Posted 7 years ago