“SKU TJ3011, the ones with the guid plates for alignment.
I purchased these even though there going on with CORE4X4 adjustable control arms. CORE arms are set up for factory style lower control arm brackets and they recommended these brackets when asked what was going to work best. SKU TJ3011 for our 03 WRANGLER TJ 4.0 5spd with DANA 30 up front.
Laser etching for alignment plate installation on the brackets makes them easy to welding on in position.
The brackets fit onto the differential tube flawlessly and are a snap to get into position for welding.
My MILLER 140 with .035 wire handled the job with no trouble.
These are heavy duty brackets with plenty of protection for the control arm ends. They are not going to colaps or bend like the factory brackets or the light duty less expensive replacement brackets out there.”
“Had to upgrade from the stock brackets after a trip to Moab where I completely tore off one and cracked the other. Since I have purchased a few items from Artech I decided to go with them again. Could not be happier These brackets are much thicker than stock and weld right in. I was not sure what control arm I was going to upgrade to so I went with the horseshoe designed for easy alignments. Brackets were welded in with no issues and then the horseshoes were welded where they needed to be. Installed new control arms and the TJ was aligned with no issues. I do not think I will need to worry about these parts for a long time”
“Bent and broke lower control arm brackets (2004 tj rubicon) on a boulder trail at Beasley Knob Ga. The new heavy duty Artec brackets are twice as thick as the stock ones ( 14 ) and installed perfectly. Great product I would highly recommend.”
“OMG I cant say enough good things about these brackets. I had bent my one of my others brackets which had already been upgraded from factory. These brackets are thicker and heavier and you can immediately tell the difference when driving. I see no future problems. Thanks for such a great product.”
“I finally got the chance to weld these brackets to my axle replacing my trashed factory LCA mounts. They fit my Johnny joints perfectly and work with a factory style cam bolt (I used procomp 20-65226). They come entirely unwelded and I was concerned that it would be hard to locate the cam guides but there is a clear witness mark so I welded them on prior to welding the brackets to the axle. These brackets are very well designed and look to be a much better option than others on the market especially considering the built in skid plates to protect my expensive long arms.”
