Quick OverviewJewelry Stand. B＆L Scope Holder. Track Length: 250mm. Base Dimensions: 310x250x70mm. 360° Degree Rotatable. Inclination on Vertical Direction: 0-45° . Microscope Handle: Yes. Focus Distance: 110mm. Illumination Type: FH Dual Illuminated Light. Top Illumination: Oblique Top Light. Bottom Illumination: Bright/Dark Field. Output Power: 30W. Input Voltage: AC 110-220V 50/60Hz. Output Voltage: DC 6V. Power Cord Connector Type: USA 3 Pins. Contains 76mm Scope Holder. JM02011116 B&L Jewelry StandJewelry StandStand TypeJewelry StandHolder Adapter TypeB＆L Scope HolderTrack Length250mmBase TypeIllumination BaseStand Throat Depth129mmBase Dimensions310x250x70mmBase Rotatable360° Degree RotatableInclination on Vertical Direction0-45° Microscope HandleYesFocus ModeManualFocus Distance110mmCoarse Focus Distance per Rotation21mmFocusing Knob Tightness AdjustableTightness AdjustableIllumination TypeFH Dual Illuminated LightTop IlluminationOblique Top LightTop Illumination TypeFluorescent LightBottom IlluminationBright/Dark FieldBottom Illumination TypeHalogen LightAperture DiaphragmAperture Diaphragm AdjustableAperture Diaphragm Mounting PositionVertical IlluminatorField Diaphragm Outer Diameter Dia. 70mmOutput Power30WInput VoltageAC 110-220V 50/60HzOutput VoltageDC 6VPower Cord Connector TypeUSA 3 PinsPower Cable Length1.8mSurface TreatmentElectroplating BlackMaterialMetalColorBlackNet Weight6.60kg (14.55lbs)Dimensions310x250x390mm (12.205x9.843x15.354 in. )NotesContains 76mm Scope HolderJewel TweezersJewel Tweezers TypeSteel Wire ClampJewel Tweezers Mounting Thread Size Dia. 3mmSurface TreatmentPolished ChromeMaterialMetalColorSilverNet Weight0.02kg (0.04lbs)Applied FieldFor JM1201, JM1206 Series MicroscopeFluorescence Bulb5W Fluorescent BulbBulb Rated Power5WBulb ShapeU ShapeMaterialGlassNet Weight0.05kg (0.11lbs)Halogen Bulb6V 30W Halogen BulbBulb Rated Power30WBulb Rated VoltageDC 6VBulb ShapeOvalBulb Mounting ModeBi-PinLight Bulb Pin StandardG4 (4mm)LCL22mmMaterialGlassApplied FieldFor BM0303, BM0304, BM1301 Series MicroscopeFuse3.15A FuseFusing Current3.15A/250VFuse TypeGlass Tube Fuse (Fast Acting)Fuse Size5x20Fuse StandardGBMaterialGlassColorSilverNet Weight0.002kg (0.004lbs)
.tb_part
{
width: 100%;
border: solid 0px #ccc;
font-size:12px;
}
.tb_part tr
{
height: 30px;
line-height: 30px;
}
.tb_part td
{
white-space: nowrap;
}
.tb_part_1 td
{
white-space: wrap;
}
.normal{
border-left:solid 2px black;
border-right:solid 2px black;
}
.tb_part tr.normal td
{
border:solid 1px #ccc;
padding-right:5px;
}
.tb_part tr.normal:nth-child(2){
border-top:solid 2px black;
}
.tb_part tr.normal:first-child{
border:none;
}
.tb_part tr.normal:first-child td{
border:none;
font-weight:bold;
font-size:16px;
}
.end-border{
border-bottom:solid 2px black;
}
.tb_part tr.memo,.tb_part tr.memo td{
border:none;
}
Technical InfoInstructionsMicroscope StandClose ΛMicroscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing: Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked. Volume size: limited by the working environment and space of the workbench. Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered. Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.
Operational requirements: 1. Install the stand as required. 2. Arrange a reasonable fixed position for the stand. 3. Carefully tighten the microscope mainframe. 4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work. 5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on. Jewelry StandClose ΛJewelry microscope stand is a special stand designed to detect jewelry, diamonds, etc. A jewelry stand is usually equipped with the following several light sources and devices: Upper light source has both natural light of a halogen lamp and fluorescent lamp. The fluorescent lamp is usually a "full-wave band" fluorescent lamp. The use of a natural light with continuous wave band can ensure the effect of observing jewelry and diamonds, and is consistent with the effect color seen under daylight. Lower light source: diffuse reflection light with dark field equipment is often used, and some advanced stand are also equipped with iris diaphragm. Uniform illumination can eliminate reflection and stray light to facilitate observation of details of the jewelry or diamond. Jewelry clips are used to clip or clamp jewels and diamonds. B＆L Scope HolderClose ΛB&L scope holder is a special stand scope holder for connecting to the Bausch & Lomb stereo microscope, under the scope holder there are two metal spring cards to fix the microscope body.Illumination BaseClose ΛIllumination base is a modular light source component, suitable for microscope stand base that has no light source of itself, and it is usually dedicated components supporting some stands. Illumination base typically includes at least one bottom lighting, and there are also illumination base that includes the circuit portion of the upper light source. Stand Throat DepthClose ΛStand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center.360° Degree RotatableClose ΛThe eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.
Placement method of different viewing angles of the microscope: General direction: the support column is behind the object to be observed Reverse direction: the support column is in front of the object to be observed Lateral direction: the support column is on the side of the object to be observed Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.Inclination on Vertical DirectionClose ΛConventional microscopic observation is to observe the observed object from top to bottom at a vertical angle of 90 degrees. Inclination on vertical direction observation is to observe from an angle of inclination direction based on the needs of the object to be observed, so as to see more suitable feature points of the observed object. Inclination observation often has ergonomic requirements that allow the observer to adjust the angle at will, and using the microscope in a more comfortable position and sitting posture can help reduce fatigue. In general, all inclination observations are to use microscope with low magnification, which requires a larger field of view and depth of field, otherwise the focusing will be more difficult. Focusing Knob Tightness AdjustableClose ΛDifferent microscope bodies, different human operations, and different requirements for observation and operation, all require adjustment of the pre-tightening force of the stand that support microscope body. Facing the stand just right, use both hands to reverse the force to adjust the tightness. (face the knob of one side just right, clockwise is to tighten, counterclockwise is to loosen) In general, after long-time use, the knob will be loose, and adjustment is necessary.
Aperture DiaphragmClose ΛThe diaphragm that determines the image plane necessary for imaging through the objective lens is called the aperture diaphragm. All irises of the traditional microscope are aperture diaphragm.
The function of aperture diaphragm is mainly to limit the size of the imaging beam, change the luminous flux, thereby improving the imaging quality. The size of the aperture diaphragm is usually variable, and it is also called iris diaphragm. When the aperture diaphragm lock is too small and the luminous flux of the imaging beam is insufficient, the fraction ratio of the objective lens is low, the imaging will become dark; however, when the aperture diaphragm is too large, there will be strong light in the field of view, and even though viewed from the eyepiece, it may have high resolution, the image on the display will be overexposed. After replacing the objective lens, the aperture diaphragm should also be adjusted appropriately, rather than adjusting the brightness of the light. The aperture diaphragm of the transmitted light is generally mounted on the microscope base. The aperture diaphragm of the biological microscope is mounted on the condenser device. On the other hand, the aperture diaphragm of compound microscopes, such as large upright metallurgical or fluorescence microscopes, is generally mounted on the in the coaxial reflection illuminator.
In the use of the aperture diaphragm, it is often necessary to adjust the center of the diaphragm. Generally, it is adjusted together with the condenser. Please refer to the adjustment method of the condenser. Jewel TweezersClose ΛJewel tweezers are clips used to clamp jewels or diamonds. The spring clip at the front end can be freely opened and closed to clamp the jewel, the rear end is often fixed on the base, and can be freely rotated and stretched to observe the different positions and angles of the jewel. The commonly used wire gemstone clamps, have moderate steel property, strong clamping, and can reduce the light shielding of the gemstone waist, allowing comprehensive viewing of the gemstone in all directionsPackagingClose ΛAfter unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
About Boli Optics:
Boli Optics Microscope Supplier sells professional microscopes, microscope accessories, and magnifying lamps. We offer parts and accessories compatible with Leica, Olympus, Nikon, and Zeiss, and more. We supply research laboratories, medical centers, universities, industrial manufactures, factories, and more. Our engineers and technicians provide technical support and design & manufacture custom microscope products for your applications. Our products are manufactured under ISO 9001 quality control standards. We also provide OEM service. Since 1994, our talented team has been working in the optics industry and serving our customers whole-heartedly. Based in Southern California, we offer fast, same day shipping from our local warehouses.
Visit Product PageEmail:
sales@bolioptics.com
Location:
8762 Lanyard Court,
Rancho Cucamonga
California
91730
