The EGW Monogram Bushing has the look of the EGW Carry Bevel Bushing combined with a solid spring plug that is longer to match the thick flange bushing. The combination makes for a very clean appearance.We then took it up a notch and made a special bushing that has not only the carry bevel, but a radius at each side on the bottom. We wanted to offer custom engraving on the spring plug to make your gun unique to you, BUT... we found the spring plug rotates during firing! We then developed a matched bushing and spring plug pair where the bushing keys into the spring plug. Now, not only will the spring plug not be susceptible to wear from rotating around while shooting, but your custom logo will stay square and true.Monogrammed bushing and spring plug sets are available in Stainless Steel and blued Carbon Steel.Available engravings on mono plugs include:Git R DoneCaspian LogoHD LogoGrenadePOW!SupermanSmiley FaceIndian StarMarine Logo FilledEGW LogoMarine Logo OutlineSkull and CrossbonesAir Force LogoCoast Guard LogoArmy LogoNavy LogoGunsmith Fit is available in all O.D.'s with a .568" I.D. Straight BoreO.D. of the bushing = Inside diameter of your slide - usually .699" - .705"I.D. of the bushing = Outside diameter of your barrel - usually .575" - .583"Please measure these two areas with calipers to find the sizes you need.Please select your options carefully.Check out our FAQ page for instructions on how to accurately take these measurements.Angle Bore is bored on an angle or a snug fit (measurements must be precise)Straight Bore is bored straight without variation. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Visit Product PageLocation:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
