This mount fits:
Ruger Max-9
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 x 5/16" Button Head Screws - Requires 5/64 Wrench or Driver(2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver(2) M4 x .7 x 8mm Flat Head Cap Screws - for mounting the plate to the slide - Requires use of 2.5mm Hex Key Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
The EGW red dot sight mount adapter plates for the Ruger Max-9 are meant to be installed in place of the factory mounting plate. Simply remove the sight plate on your gun and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the mounting plate cover- Install the EGW Sight Mount on the slide- Torque mounting screws to 15in/lbs- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs (2) 6-32 Button Head Screws - Requires use of 5/64" Hex Key Provided for Vortex Viper and Venom Sights(2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key Provided for Burris FastFire and Docter Sights(2) M4 x .7 x 8mm Flat Head Cap Screws - for mounting the plate to the slide - Requires use of 2.5mm Hex KeyThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.Click here to see a video from Vortex on how to install our red dot base on a slide. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
