Vortex Viper / Venom Sight Mount for Glock (fits Burris FastFire, Docter, Viridian RFX25) Reviews

4.9 Rating 40 Reviews

Mounting Hardware is Included This is a press fit mount. Utilization of a sight pusher tool may be required.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. This EGW Mount for Glock - for the Vortex Venom will fit all generation listed below:
Glock 17 Glock 17L Glock 19 Glock 19x Glock 20 Glock 21 Glock 22 Glock 23 Glock 24 Glock 26 Glock 27 Glock 29 Glock 30 Glock 30 SF Glock 31 Glock 32 Glock 33 Glock 34 Glock 35 Glock 36 (Our mount is wider than the slide, but it will still work) Glock 37 Glock 38 Glock 39 Glock 41 Glock 42 (Our mount is wider than the slide, but it will still work) Glock 43 (Our mount is wider than the slide, but it will still work) Glock 43x (Our mount is wider than the slide, but it will still work) Glock 44 Glock 45 Glock 46 Glock 48 (Our mount is wider than the slide, but it will still work) Canik TP9 SF Canik TP9 SA Bersa BP9CC Tactical Solutions .22lr Conversion Taurus G3c Taurus GX4 (non optic ready slide) Advantage Arms .22lr Conversion PSA Dagger (NON-optics ready)
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS Glock 19 Gen 4 MOS Glock 34 Gen 4 MOS Glock 35 Gen 4 MOS Glock 40 Gen 4 MOS Glock 41 Gen 4 MOS Glock 22 Gen 5 MOS Glock 23 Gen 5 MOS Glock 34 Gen 5 MOS Glock 45 MOS Glock 43x MOS Glock 48 MOS
WILL NOT WORK WITH ANY CANIK THAT HAS A STEPPED REAR SIGHT CUT Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Are you looking to replace your factory Glock rear sight with a red dot mounting plate? Our red dot adapter plates for Glocks easily let you mount your red dot to your gun with no modifications to the slide! Our Glock red dot sight mounts are meant to be installed from the left to the right. The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Red Dot Mounting Plate Installation Instructions - Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.Click here to see a video from Vortex on how to install our red dot base on a slide. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“I installed the mount on my Canik Tp9sf last night and it worked like a champ. It is close to the Pistols slide and looks great. It went on super simple.”

Helpful Report

Posted 2 years ago

“Yes I got it and my daughter love her sight. Thank you.”

Helpful Report

Posted 2 years ago

“Fast, easy and great fit”

Helpful Report

Posted 2 years ago

“Very snug fit, set screw was probably overkill….quality top notch….much better than that CCP SH?T that is out there Keep up the good work”

Helpful Report

Posted 2 years ago

“works perfectly”

Helpful Report

Posted 2 years ago

“To EGW: This is the fourth mount that I have purchased from you. Two Novak mounts of which one went on to a Springfield Armory 1911 .45acp commander holding a Vortex Venom RMR. The second I had to slightly modify to fit a 10mm Rock Island Armory 1911 also holding a Vortex Venom RMR. The third and fourth were for Glocks. One is on a G34 and the other (the newest) on a G19. The RIA 10mm is used exclusively for pug hunting here in Florida. I hold our hunting patty's one-shot kill record with it. The Springfield Armory 1911 with your Novack Mount I have given to my son. He is with the Navy S.E.A.L.s and tells me that his Team Commander is extremely impressed, as is their armorer. My son tells me that they are looking into your mounts for some of their own personal weapons. And if it is good enough for the S.E.A.L.s … I took my Glock 34 with me to Gunsight for a week long class on Pistol Craft. My son went with me. It was my gift to him for coming home from a very long deployment. He has a EGW mount on his G19 which is what he used at Gunsight. I credit the G34 with giving me a slight advantage over his G19 as my final score was only a few points above his. Also old age and experience too, even though I was only an Army Ranger. I am about to place another Novack mount on a Kimber Custom Shop 1911. It is my Everyday Carry piece. I am head of our Church Security Team. Some of our members are taking notice of my G19 and its RMR. Everyone of EGW's mounts provide a rock solid and secure foundation for all of my RMR sights. Not one has ever slipped, broken or failed to hold the RMR to the slide. 9mm, .45acp and 10mm handguns make no difference to the strength of this mount. The recoil on the 10mm is impressive. Yet the mounts have never failed me. I have had the RMR break down on the 10mm and on my G34. But only after literally thousands of rounds through each. Yet the mounts act as if they are one piece with the slides. I could have had the slides milled for the RMR. But two things stopped me. One was voiding the warranty on the weapon. The other was the cost of milling and the quality. EGW's mounts do not challenge the integrity of the slides. The height of the mount I found to be negligible. I own a Walther Q5 Match whose slide is milled for an RMR. But it too requires a plate for specific types of RMR sights which raise the milling almost back to the original height of the slide. After doing all this research to learn about all the different options to mount an RMR to a slide, EGW mounts stood high above all others. I trust my life and the life of all those I love and care for to my weapon of choice. And it carries only an EGW mount. Nothing else will do. When it truly matters, when the lives of those you love and even your own life hang in the balance, your gear has to work. It has to function the first time, and every time. There can be no compromise in that scenario. I look back at my time in the military and I often wonder if I had the gear then that I have now, would those who did not come home be with their families now? Now I do have the gear. And with it, everyone goes home. Thank you for your excellent product. One look at it tells me of the masterful craftsmanship that you put into every product you make. You do not compromise. On that alone I will trust my safety and that of those in my care. With the greatest respect; Dr. Daniel R.Thomas”

1 Helpful Report

Posted 2 years ago

“Fits perfectly and built with quality material. You folks are the best.”

Helpful Report

Posted 2 years ago

“Good quality mound, not a cheap aluminum piece that the screws strip out of after 50 rounds. Used these before and they hold up well in competition.”

Helpful Report

Posted 2 years ago