Login
Start Free Trial Are you a business?? Click Here

Red Dot Sight Mount for Smith and Wesson (S&W) Revolver (fits Vortex Viper / Venom, Burris FastFire and Docter) Reviews

4.5 Rating 39 Reviews
Read EGW Guns Reviews

This Evolution Gun Works - EGW mounts was designed to fit :
Smith & Wesson K Frame Revolvers Smith & Wesson L Frame Revolvers Smith & Wesson N Frame Revolvers Smith & Wesson X Frame Revolvers
If your revolver is not drilled and tapped this mount will not work. The best way to verify that it is/is not drilled and tapped is to open the cylinder and check the rib underneath. There should be through holes that are drilled and tapped. If there are not (like the above image) this mount will not work without you having the gun drilled and tapped. You can have a competent and qualified gunsmith drill and tap the top strap with the standard S&W hole pattern which will allow you to use our mount. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-48 Torx Head Screw Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in place of the rear sight- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.  
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
 
K-frame (medium) models
S&W 10 Police Vortex Viper Red Dot Mount S&W 11 Vortex Viper Red Dot Mount S&W 12 Vortex Viper Red Dot Mount S&W 13 Vortex Viper Red Dot Mount S&W 14 Vortex Viper Red Dot Mount S&W 15 Vortex Viper Red Dot Mount S&W 16 Vortex Viper Red Dot Mount S&W 17 Vortex Viper Red Dot Mount S&W 18 Vortex Viper Red Dot Mount S&W 19 Vortex Viper Red Dot Mount S&W 48 Vortex Viper Red Dot Mount S&W 53 Vortex Viper Red Dot Mount S&W 64 Vortex Viper Red Dot Mount S&W 65 Vortex Viper Red Dot Mount S&W 66 Vortex Viper Red Dot Mount S&W 67 Vortex Viper Red Dot Mount S&W 68 Vortex Viper Red Dot Mount S&W 617 Vortex Viper Red Dot Mount
L-frame (medium-large) models
S&W 386 Vortex Viper Red Dot Mount S&W 586 Vortex Viper Red Dot Mount S&W 686 Vortex Viper Red Dot Mount S&W 686+ Vortex Viper Red Dot Mount S&W 619 Vortex Viper Red Dot Mount S&W 620 Vortex Viper Red Dot Mount S&W 646 Vortex Viper Red Dot Mount S&W 69 Vortex Viper Red Dot Mount
N-frame (large) models (formerly S-frame)
S&W 29s Vortex Viper Red Dot Mount S&W 1917 Vortex Viper Red Dot Mount S&W 22 Vortex Viper Red Dot Mount S&W 24 Vortex Viper Red Dot Mount S&W 25 Vortex Viper Red Dot Mount S&W 27 Vortex Viper Red Dot Mount S&W 28 Vortex Viper Red Dot Mount S&W 29 Vortex Viper Red Dot Mount S&W 57 Vortex Viper Red Dot Mount S&W 58 Vortex Viper Red Dot Mount S&W 610 Vortex Viper Red Dot Mount S&W 625 Vortex Viper Red Dot Mount S&W 627 Vortex Viper Red Dot Mount S&W 629 Vortex Viper Red Dot Mount
X-frame models
S&W 500 Vortex Viper Red Dot Mount S&W 460XVR[46] Vortex Viper Red Dot Mount

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Mount fit perfectly. It lowered the optic approximately 3/8 from were it was with the picatinny and adapter. The only thing that would have been nice is two of the proper screws to fill the holes that weren’t used.
1 Helpful Report
Posted 1 year ago
Just got done fitting on my mm 7 shot S&W.Fits really nice and easy.Will recommend EGW mounts anyone looking for one.Thanks EGW from TD
Helpful Report
Posted 1 year ago
It arrived in 3 days, packaging was intact. It was easy to mount. The Vortex Venom attached perfectly. It is a solid mounting system.
Helpful Report
Posted 1 year ago
I bought this plate to mount my Truglo Trutec Micro to my 686+ and it fits great. This was the lowest profile mount I could find, as my goal was to get the dot as close to iron-sight level as possible to keep aiming as normal as possible. I deducted stars because of the mounting hardware. I dislike that the red dot mounting screws were hex/Allen key and the plate mounting screws were torx. I wish they were all torx to keep consistent. Also, I rounded out one of the Allen key screws when I began to snug up my red dot. So I'm going to purchase 6-32 torx screws elsewhere anyway to replace the stripped Allen ones with. Small Allen keys are never the answer, they are basically round holes at that size. Hopefully I can get them removed without having to drill them
1 Helpful Report
Posted 1 year ago
Awesome product, fit and finish are incredible. I use EGW for all my optic mounting solutions, they're the best!
Helpful Report
Posted 1 year ago
A perfect fit
Helpful Report
Posted 1 year ago
fit great, not bulky, low profile, perfect
Helpful Report
Posted 1 year ago
Fits perfectly on my Model 629. Took less than 10 minutes to install everything.
Helpful Report
Posted 1 year ago