Login
Start Free Trial Are you a business?? Click Here

Red Dot Sight Mount for Smith and Wesson (S&W) Revolver (fits Vortex Viper / Venom, Burris FastFire and Docter) Reviews

4.5 Rating 39 Reviews
Read EGW Guns Reviews

This Evolution Gun Works - EGW mounts was designed to fit :
Smith & Wesson K Frame Revolvers Smith & Wesson L Frame Revolvers Smith & Wesson N Frame Revolvers Smith & Wesson X Frame Revolvers
If your revolver is not drilled and tapped this mount will not work. The best way to verify that it is/is not drilled and tapped is to open the cylinder and check the rib underneath. There should be through holes that are drilled and tapped. If there are not (like the above image) this mount will not work without you having the gun drilled and tapped. You can have a competent and qualified gunsmith drill and tap the top strap with the standard S&W hole pattern which will allow you to use our mount. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-48 Torx Head Screw Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in place of the rear sight- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.  
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
 
K-frame (medium) models
S&W 10 Police Vortex Viper Red Dot Mount S&W 11 Vortex Viper Red Dot Mount S&W 12 Vortex Viper Red Dot Mount S&W 13 Vortex Viper Red Dot Mount S&W 14 Vortex Viper Red Dot Mount S&W 15 Vortex Viper Red Dot Mount S&W 16 Vortex Viper Red Dot Mount S&W 17 Vortex Viper Red Dot Mount S&W 18 Vortex Viper Red Dot Mount S&W 19 Vortex Viper Red Dot Mount S&W 48 Vortex Viper Red Dot Mount S&W 53 Vortex Viper Red Dot Mount S&W 64 Vortex Viper Red Dot Mount S&W 65 Vortex Viper Red Dot Mount S&W 66 Vortex Viper Red Dot Mount S&W 67 Vortex Viper Red Dot Mount S&W 68 Vortex Viper Red Dot Mount S&W 617 Vortex Viper Red Dot Mount
L-frame (medium-large) models
S&W 386 Vortex Viper Red Dot Mount S&W 586 Vortex Viper Red Dot Mount S&W 686 Vortex Viper Red Dot Mount S&W 686+ Vortex Viper Red Dot Mount S&W 619 Vortex Viper Red Dot Mount S&W 620 Vortex Viper Red Dot Mount S&W 646 Vortex Viper Red Dot Mount S&W 69 Vortex Viper Red Dot Mount
N-frame (large) models (formerly S-frame)
S&W 29s Vortex Viper Red Dot Mount S&W 1917 Vortex Viper Red Dot Mount S&W 22 Vortex Viper Red Dot Mount S&W 24 Vortex Viper Red Dot Mount S&W 25 Vortex Viper Red Dot Mount S&W 27 Vortex Viper Red Dot Mount S&W 28 Vortex Viper Red Dot Mount S&W 29 Vortex Viper Red Dot Mount S&W 57 Vortex Viper Red Dot Mount S&W 58 Vortex Viper Red Dot Mount S&W 610 Vortex Viper Red Dot Mount S&W 625 Vortex Viper Red Dot Mount S&W 627 Vortex Viper Red Dot Mount S&W 629 Vortex Viper Red Dot Mount
X-frame models
S&W 500 Vortex Viper Red Dot Mount S&W 460XVR[46] Vortex Viper Red Dot Mount

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Perfect fit
Helpful Report
Posted 2 years ago
Perfect fit. Fast and professional service. Thank You
Helpful Report
Posted 2 years ago
Easy to install, lowest possible mounting for red dot, and looks great.
Helpful Report
Posted 2 years ago
Removed rear sight of S&W 350 Legend revolver by loosening one screw. Pre drilled holes on top of revolver lined up perfectly with holes in red dot mount and mount was secured with provided screws. Burris fast fire III red dot bolted right on to top of mount. Perfect! Didn'teven need picatinny rail. Highly pleased.
1 Helpful Report
Posted 2 years ago
I have several of these on Ruger GP100s and a S&W 610, S&W Model 19 Carry Comp and a S&W model 27. As my eyes age, I’ve put red dots on my carry pistols. These have brought the fun back to shooting wheel guns. I have two more GP 100s I’ll soon be purchasing these for. They stay tight under heavy recoil and I only wish you made one for the Kimber K6! I recommend them for anyone that loves wheelguns but can no longer see the front sight effectively.
3 Helpful Report
Posted 2 years ago
The fit was perfect. It mounted to my S&W 686 plus, and to my Vortex Venom easily and solidly.
2 Helpful Report
Posted 2 years ago
Despite EGW's response 9mos ago that they are going to address complaints, they are not and have no intention to do so. This is the information that I was just given, in stark contrast to the information from 2 days ago when I called and ordered! I was assured that this used 3 screws and would completely cover the top strap of my X-frame. It does not. Frankly, leaving the front of the revolver's frame with exposed screw hole and milling looks like absolute hell with this product installed. I'm extremely disappointed. In fairness, all prior orders and dealings with EGW have been first rate!!!
2 Helpful Report
Posted 2 years ago
Hi, thanks for contacting us. We are sorry to hear you are unhappy with our products and had received some incorrect information. Our S&W mounts previously had only used one factory hole, most are now updated to use two. We do not have any that use the third hole. We have passed the information along to our product development team. Thank you for using our products in the past, we look forward to working with you in the future.
Posted 2 years ago
Easy install. Lowest possible mounting option. Retained zero so far on Model 27.
1 Helpful Report
Posted 2 years ago