Mounting Hardware is Included WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. This mount fits:
Factory Drilled and Tapped Stevens 301 .410 models
This mount measures .350" from the top of the barrel to the top of the mount. This mount does not fit:
Stevens 301 12 and 20 models
Specifications Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Thickness Above Receiver: .350"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 Button Head Screws - Requires 5/64 Wrench or Driver(2) 6-32 Flat Head Screws - Requires 5/64 Wrench or Driver(2) 8-40 Torx Screws - Requires T10 Wrench or Driver Red Dot Fitment: Bushnell RXS-100Crimson Trace CTS-1500Holosun 407K*Holosun 407k-GRHolosun 507K*Holosun 507k-GRHolosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbsModification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
