Login
Start Free Trial Are you a business?? Click Here

Holosun K Series (fits Vortex Defender CCW, Deltapoint Pro, JPoint, Redfield Accelerator, and Optima) Red Dot Mount For Mount for Taurus G2, G3, PT111 G2, PT140 G2, PT709, PT740, AND TX22 Reviews

2 Rating 1 Reviews
Read EGW Guns Reviews

Mounting Hardware is IncludedWE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.This mount fits:
Taurus G2S Taurus G2C Taurus G3 (old style rear sight, not new Glock style) Taurus PT111 G2 Taurus PT140 G2 Taurus PT709 Taurus PT740 Taurus TX22
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.78"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Bushnell RXS-100Crimson Trace CTS-1500Holosun 407K*Holosun 407k-GRHolosun 507K*Holosun 507k-GRHolosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbsModification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.   Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

The mount was indeed for a Tarus G2, however the optic I have is a Sig Sauer Romeo Zero. The mounting Screw to the rail/slide was too short so i had to counter sink the mounting plate. Also the extra screws to mount the Sig Sauer to the base were too long so I had to take it to a gun smith to adjust the screws to hold the optic to the base. Not very happy as i incurred addition cost from the gunsmith and more time on a simple task
Helpful Report
Posted 3 weeks ago