Mounting Hardware is Included
This mount fits:
Browning A-Bolt Long Action
This mount does not fit:
Browning AB3
Browning X-Bolt
Browning A-Bolt Mountain Titanium in .300WSM
Please verify that your gun is an A-Bolt. Locate the serial number and identify the last three digits. They represent the following rifles:
351 is an A-Bolt II or I (original A-Bolt)
358 is the AB3 (THIS MOUNT DOES NOT FIT THE AB3)
354 is an X-Bolt (THIS MOUNT DOES NOT FIT THE X-BOLT)
Specifications:
Rail Type: One Piece Picatinny
Machined from: Domestic 7075 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 3.86"
Overall Length: 7.064"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: Yes
Ambidextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
This mount comes standard with a bevel on both sides making it ambidextrous.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long-lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
What is an A-Bolt? It could be an A-Bolt or an A-Bolt II or possibly even an AB3.
The A-Bolt was built in two main series. The original A-Bolt and the A-Bolt II. Both are very similar rifles and are considered part of a design family. The new AB3 — sometimes also referred to as an A-Bolt — is a different model and design. Accessories, such as bases and rings, magazines, etc. made for the original A-Bolt and A-Bolt II will not fit the AB3. All three of these designs are totally separate from the X-Bolt rifle as well.
Please check your screw diameter. Regular Browning A-Bolts come with #6 screws. Browning AB3s come with #8 screws. This product is designed for the standard A-Bolt, and A-Bolt 2 not the AB3. We do offer a mount for the AB3. The part number for that is 43400 for a 0 MOA and 43402 for a 20 MOA.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
