This mount fits:
Bergara B14 (#6 Screws)
Bergara B14R
Bergara Short Action Premier Series (#8 Screws)
Christensen Arms Short Action
Early Ridgeline - Based on Savage Action Serial Numbers Starting With CB Lower Than CB00909 #6-48 Screws
Later Ridgeline - Based on Remington 700 Actions Serial Numbers Starting With CV #6-48 Screws
Mesa - Based on Remington 700 Actions Serial Numbers Starting With CV #6-48 Screws
CVA Paramount
CVA Paramount Pro
Defiance Machine Stryker Ridge Short Action (#8 screws)
Remington 700 Short Action
Remington 700 Ultimate Muzzleloader
Remington 722 Short Action
Remington 40X Short Action
Remington 700 Short Action (#8 screws)
Remington 700 Short Action Police Tactical (#8 screws)
Remington 700 Short Action LTR (#8 screws)
Remington 722 Short Action (#8 screws)
Remington 40x Short Action (#8 screws)
Machined From: 4140 Carbon SteelFinish: ParkerizedCompatible with Picatinny or Weaver scope rings.Mounting Hardware: Socket Head Torx® Screws and Wrench ProvidedCenter Spread: 3.627"Overall Length of Mount: 6.276"
This mount comes standard with a bevel on both sides making it ambidextrous.The bolt pattern on our Remington 700 Short Action mount fits Short Action Remington 700 rifles (example 223, 308), as well as the 722 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yards30 MOA - if shooting 1000-1500 yards40 MOA - if shooting 1500+ yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
