This mount fits:
Bergara B14 Long Action (#6 Screws)
Bergara Premier Long Action (#8 Screws)
Remington 700 Long Action
Remington 700 Long Action (#8 Screws)
Remington 700 Long Action Police Tactical (#8 Screws)
Remington 721 Long Action
Remington 725 Long Action
Christensen Arms Long Action
Mauser M18 (All Calibers)
Sauer 100 (All Calibers)
Sauer 101 (All Calibers)
Rail Type: One Piece PicatinnyMachined From: Solid 4140 Carbon SteelFinish: ParkerizedCenter Spread: 4.485"Overall Length of Mount: 7.064"Height: .35" (Top of Receiver to Top of Picatinny)Weight: 2.5 ozQuick Disconnect Ring Compatible: YesAmbidextrous: YesMounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit IncludedTorque Specs: 20 in/lbsCompatible with: Picatinny or Weaver scope rings.
This mount comes standard with a bevel on both sides making it ambidextrous.The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 721, and 725. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and parkerized for long lasting durability.
We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yards30 MOA - if shooting 1000-1500 yards40 MOA - if shooting 1500+ yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
