This mount fits:
Howa 1500 /Weatherby Vanguard short action calibers
.223 Rem.
22-250 Rem.
.243 Win.
6.5 Creedmoor
7MM Rem. Mag.
308 Win
This mount will not fit:
Howa 1500 Superlite
Machined From: Solid 4140 SteelFinish: ParkerizedCenter Spread: 3.886"Overall Length of Mount: 6.670"Height: .35" (Top of Receiver to Top of Picatinny)Weight: 5.6 ozQuick Disconnect Ring Compatible: YesAmbidextrous: YesCompatible with Picatinny or Weaver scope rings.Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit IncludedTorque Specs: 20 in/lbs
Are you looking to mount a scope to your Weatherby Vanguard? These mounts sit at about .35" high. Measurements may vary depending if the firearm has a stepped receiver. Our .35" measurement is typically from the highest point on the receiver.Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish.Compatible with Picatinny or Weaver scope rings. Add our HD Scope Rings to make it a complete package!From manufacturing to packaging, our products are made with pride in the USA.Werecommend:0 MOA -if shooting 0-500 yards20 MOA -if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
