“Got these to replace the crappy Sunmate tires that came stock with the board. Decided to go with the full kit because I also needed new bearings and it’s nice to have extra wheel hubs for a quick swap. Only tested them for a mile before it got too dark out but what a difference. Definitely a much better ride now.”
“the product looks great but the plastic rims let the hole kit down the rims click and groan every time you put load on them either while carving or traveling on anything other than flat concrete and it seams to be getting worse, I changed the front wheels to the back hoping that the drive gear would offer more support to the rims and this worked for a day. not sure if I will continue to use these wheels I am concerned that one will just let go one day which is not a fun way to ride.”
Hi Neil,
Thanks for taking the time to leave a review.
From what you're describing, it sounds like a good re-grease of your bearings, bushings and pivot cups may help with this. If you are still experiencing the concern, please get in touch with our support team who will be able to assist you further.
Regards,Evolve HQ
Hey Brian,If you're having any troubles, please feel free to reach out to tech support.Ensure your tyres are pumped to a 40-45 psi and that your belt tension is correct.Thanks!Evolve HQ
“Casting of the 6" wheels is way off and makes for a oval wheel so had to buy new wheels and spend ages trying to set them onto the wheel hubs so they don't wobble. Everything else is mint and get 5 stars if it wasn't for the tyres”
“Im not a fan of AT wheels personally, but once I tried the 6 inch wheels these are good combo of speed and comfort on my carbon gtr! Could hit 39kmh and still be stable on the ride :)”
“I haven't had a chance to play with my AT kit yet, but the sheer fact that Evolve put together a custom kit for me with the 6" wheels and camo hubs I wanted, only charging a tiny fee to swap over the hubs with the tires included in the regular setup.
When my 2 broken legs heal ill be on this like kong”
“Was very keen to try out the 6inch AT’s having ridden the 7inch extensively (as well at the 107’s.)
Had real problems trying to get the tires to inflate evenly- resulting in bad vibratoons through the board at speed and under hard carving.Tried multiple inflates, different inner tubes, anew tire and still couldn’t get therm to inflate evenly. Really disappointing”
Hi Antony,
Thanks for taking the time to write this review.
I'm having a little trouble understanding what you mean by inflating the tyres evenly? Perhaps you could try a different pump if they all can't reach 40 PSI. As for the vibrations, I recommend checking that the brass weights from inside the hubs are all present. If one is missing, this may cause abnormal behaviour. There should be four per hub.
If you are concerned, please don't hesitate to get in touch with your local tech support team, they would be more than happy to help you get to the bottom of this.
support@evolveskateboards.co.nz
Regards
