The 2nd generation of the Ultra 7 suppressor superseded the last in late 2020. The new version is both quieter and lighter than what was previously available. The Ultra 7 is designed for applications where a compact form factor is needed. You can expect excellent suppression out of this can even though it has a relatively small form factor. There are two options when it comes to caliber. .30 caliber is the best choice if you want the most flexibility, this allows for calibers from .300 RUM and down. 6.5/.243 optimizes suppression but at the same time limits your variety of options quite a bit. The Ultra 7 Gen 2 meters at 139 dB (milspec left/right) and 129 sB at the shooters ear. This was tested with full power M118LR ammunition out of a 20" barrel on an Accuracy International AX. TBAC now specifies the dB rating as one number because of the consistency of the PULSE system that they use for testing. Compared to the older Gen. suppressors the new version is about 20% lighter. With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the ULTRA suppressors use a heat-treated 17-4 thread insert and initial blast shield. Like the original, the Gen2 ULTRA is all-titanium and is fully welded. The Gen. 2 is now a "tubeless" design, with the baffles joined directly with no separate tube. The Ultras were designed to be the "ultimate" lightweight precision rifle suppressor. This means we used materials to meet those goals. Titanium, even Grade 5, is ultimately limited by temperature. The Ultras are very strong but excursions above 800 degrees are not good for the material. If you take it far enough above 1000 degrees, it will get too weak to sustain the blast and you would eventually get a failure. We recommend keeping the Ultra series less than 800 degrees. TBAC products are well known for being the best in the industry by shooters around the US. There is not anything else that currently competes the suppression level or weight you can expect out of the Ultra series. Specifications:
Caliber: 6.5mm Material: Titanium Length: 7" Diameter: 1.5" Weight: 8.0 ounces (CB mount) / 9.8 ounces (Direct Thread) Mount: CB Muzzle Brake or Direct Thread Brake Material: Heat-treated 17-4 stainless Brake Finish: Ionbond DLC Finish: Black Cerakote Use: Precision/Long-range rifle, bolt or semi-auto
Special Features:
Direct thread attachment option CB series muzzle brake and flash hider attachment option Ionbond DLC coating on CB muzzle devices Conical shoulder surface on CB mount 100% titanium construction "Tubeless" construction 360-degree fully-welded baffle stack Magnum rated Rock-Solid POI Repeatability TBAC Lifetime Warranty
Minimum Barrel Lengths:
6" - .300 Blackout (subsonic) 8" - .300 Blackout (full power) 10" - 6.8 SPC, 7.62x39 11.5" - 223 Rem, 5.56, 6.5 Grendel 14.5" - .308 Win 16" - .260 REM, 6.5 Creedmoor, .243 WIN 18" - 7mm RM, 7mm WSM, .300 WIN MAG, .300 WSM, .22 Creedmoor, 6.5 PRC, 6.5 SAUM, 7 SAUM 20" - 7mm RUM, .300 RUM, .300 PRC 22" - .300 Norma Magnum, 28 Nosler, 7 STW 23" - 26 Nosler, 6.5-300 Weatherby
Once your suppressor purchase is finalized with Mile High Shooting, a Form 3 will be filed with the ATF requesting approval to transfer your suppressor to your chosen FFL. Initial processing can take 3-7 business days. Customers may help expedite this time frame by requesting the chosen FFL to send a copy of their FFL & SOT to ffl@milehighshooting.com. Please note, initial processing time may be delayed further if your chosen FFL fails to provide required documentation in a timely manner. Once submitted, it takes 7-21 days for Mile High Shooting to receive the Form 3 approval. As soon as the approval is received, your suppressor and any accessories will be shipped to your chosen FFL within 24-48 business hours by 2 Day Air. Your chosen FFL will then contact you once it is received and you may complete your Form 4 processing at their facility. ___LEGAL INFO______ Mile High Shooting Accessories (MHSA) will only ship suppressors to Class III FFL holders. BATF regulation information for Suppressor ownership are as follows: Be at least 21 years of age. Be a U.S. citizen. Have no felony convictions or domestic violence convictions. Have no dishonorable discharge. Not deemed mentally unstable by a competent authority. The NFA rules/laws are posted through the BATF website. At this time, the following states DO NOT ALLOW private ownership of suppressors: CA, MA, DE, HI, NJ, NY, RI, IL, District of Columbia. CA allows class 3 dealers and class two manufacturers to possess suppressors.
U.S. Government Export Restriction This item is restricted for export by the State Department and Department of Commerce. Make sure that you are familiar with all applicable laws. ITAR Information.
FFL Requirements & Magazine Restrictions This item has to ship to an FFL. Please read the attached information. Shipping Rules & Magazine Restrictions.
About Mile High Shooting:
Mile High Shooting Accessories has over 40 years of experience in the retail and sports shooting industries. Mile High is the world's largest stocking distributor of Accuracy International and Spuhr, also stocking lines such as Thunder Beast, Nightforce, Swarovski, Vortex, Zero Compromise Optic (ZCO), Zeiss, Hornady and many more! We pride ourselves on stocking the best brands in the industry. We are proud to be veteran-owned, Woman-founded, offer industry-leading service, and run our business with integrity!
Visit Product PagePhone:
3032559999
Location:
5831 Ideal Drive,
Frederick
Colorado
80516
