Enerdrive B-TEC LiFeP04 12v 100Ah G2 Lithium Battery Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Smart Phone Monitoring System The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM Specifications Normal Specification EPL-100BT-12V-G2 Nominal Voltage 12.8V Nominal Capacity 100Ah Cycle Life (DOD 80% under controlled conditions) 2000 Cycles Standard Charge Specification (Lithium profile charger required) Battery Charge Temperature 0 45C Normal Charge Voltage CV/CC* 14.20 14.60V Standby (Float) Voltage 13.50 13.80V Maximum Charge Current 60A @ 25C for 30mins Recommended Charge Current For Maximum Life, Charge in the lower amperage range 20~60A Standard Discharge Specification Battery Discharge Temperature -20 60C Battery Output Voltage Range 11.00 14.60V Maximum Discharge/Pulse Current 100A @ 25C 5C for 30 mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage 11.20V Circuit Protection The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. Over-Charge Protection Over-charge Protection Per Cell 3.90V 0.03V Over-charge Release Per Cell 3.60V 0.05V Over-charge Release Method Discharge below release voltage Over-Discharge Protection Over-discharge Protection Per Cell 2.80V 0.05V Over-discharge Release Per Cell 3.20V 0.05V Over-discharge Release Method Apply Charge/Voltage 12.8V Battery Manual Reset Button Yes Over Current Protection Discharge Over Current 110A for 30s 450A for 1s Protection Reset Time Approx 10s Auto Release Over Current Release Method Disconnect Load Over Temperature Protection Battery Discharge Over Temperature Protection to 65C 5C Release at 50C 5C Battery Charge Over Temperature Protection to 55C 5C Release at 45C 5C Short Circuit Protection Auto release after 5s Dimensions Length 318mm Width 165mm Height 232mm Weight Approx 12.6kg Case Construction Hi Impact ABS Plastic Storage Information Temperature & Humidity Range 30 days -20C 60C, 5 75% RH 90 days -10C 45C, 5 75% RH
Visit Product Page
