The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high pass filter switches conveniently located on the mic body. At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available. HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish. Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed and manufactured in Australia. SM6 Shockmount XLR Cable Microphone Dust Cover Specs Acoustic Principle - Pressure Gradient Active Electronics - JFET impedance converter with bipolar output buffer Capsule - 1.00" Polar Pattern - Omni, Cardioid & Figure Address Type - Side Frequency Range - 20Hz - 20kHz Output Impedance - 200Ω Maximum SPL - 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level - 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options: +48V phantom power required from mixer or interface +24V phantom power required from mixer or interface Output - 3-pin XLR Weight - 860 g Dimensions - 209 x 55 x 55 mm
Visit Product Page
