A 0.5 mil clear polyester film coated on both sides with an aggressive synthetic hot melt rubber adhesive (1.5 mils per side). This 3.5 mil tape is provided on a 2.7 mil white siliconized paper release liner and wound on a 3” neutral core.
FEATURES/APPLICATIONS:
Excellent quick-stick; ideal for laminating difficult substrates & various webs, such as foams and foils (i.e. for fabrication of mouse pads).
Superior moisture resistance in humid conditions once bonded.
Splicing of various materials such as papers, plastics, films, foils, etc.
Mounting nameplates, keyboard assembly, etc.
PHYSICAL PROPERTIES:
Backing
0.5 mils (0.012mm) Clear Polyester
Adhesive (exposed & liner side combined)
3.1 mils (0.078mm) Synthetic Hot Melt Rubber
Total Thickness (exclusive of liner)
3.5 mils (0.090mm)
Liner
2.7 mils (0.070mm) White Siliconized Paper
Adhesion to Steel
64 oz/inch
Tensile Strength
18 lbs/inch
Elongation
130%
Application Temperature
50°F to 104°F (Optimal Range 64°F to 104°F)
Temperature Resistance
-4°F to 140°F (Optimal Range 14°F to 140°F)
SURFACE PREPARATION:
The surface should be clean, dry, and free from grease, oil, powder, dust, release agents, etc.
STORAGE:
Tape should be stored out of direct sunlight in a cool, dry area at 65°F to 70°F and 50% RH.
Alternative to: Adchem #3175M; Venture #512; Scapa #S-662.
NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Phone:
877-284-4781
Email:
hello@tapejungle.com
