End Vise Slide - Small Reviews

3.7 Rating 6 Reviews

About Woodcraft:

Woodcraft Supply, LLC is one of the nation's oldest and largest suppliers of quality woodworking tools and supplies. You'll find Woodcraft stores in more than 70 major metropolitan areas across the U.S.; and Woodcraft annually distributes 1.5 million catalogs featuring more than 10,000 items to all 50 states and 117 foreign countries. The Woodcraft catalog is a standard among woodworkers as the most complete offering of first rate products for woodworking available anywhere. Woodcraft also publishes six issues of Woodcraft Magazine annually.

Visit Product Page

Phone:

800-535-4486

Location:

1177 Rosemar Rd,
Parkersburg
West Virginia
26105

Visit Product Page

WC From Great Falls

Verified Reviewer

“In the image of the product the middle piece that attaches the screw to the metal 'box' is located on the far side of the vise. In the installation instructions it shows the real way it should be setup with the middle piece attaching on the closer side to the rotating handle.”

1 Helpful Report

Posted 3 years ago

TL From BREVARD

Verified Reviewer

“I used this for tail vise on Woodcraft's Lynch Classic Workbench, as instructed by Matthew Teague. It works well, but has taken some adjustments, as the large side plate had a 1/8" variation in width from front to back, as well as rough edges, both requiring some grinding with my edge sander. Constructing the wooden structure covering the worm screw was tedious, but doable. I now have a smooth functioning tail vise.”

Helpful Report

Posted 3 years ago

JL From FORT WORTH

Verified Reviewer

“The vise works great so far. I agree the instructions or installation ideas could be better. Here is my approach with a diagram if it helps anyone. https://www.reddit.com/r/woodworking/comments/mfgsos/building_a_workbench_with_wood_river_end_vise/?utm_source=share&utm_medium=ios_app&utm_name=iossmf”

Helpful Report

Posted 4 years ago

JL From FORT WORTH

Verified Reviewer

“So far I am pleased with the operations but there could definitely benefit for improved installation guidance. I have attached details on my installation and hopefully others will find it helpful. https://www.reddit.com/r/woodworking/comments/mfgsos/building_a_workbench_with_wood_river_end_vise/?utm_source=share&utm_medium=ios_app&utm_name=iossmf”

1 Helpful Report

Posted 4 years ago

RM From Hurst

Verified Reviewer

“I am pleased to have used this vise. It performs well and was very reasonably priced. Directions were vague. Takes a bit to figure out but in the end well worth it.”

Helpful Report

Posted 6 years ago

“Just bought this and not sure where to start. Directions are very poor. No measurements or cut sheet available. It looks like you need a 4" top to properly mount it, which I do not have. I am thinking of returning it, not worth the time and trouble. Anyone who has mounted one care to give me some advice?”

Helpful Report

Posted 6 years ago