Please note if purchasing 1 x 3 metre trim, the trim will arrive as 2 x 1.5 metre sections. This is to prevent damage in transit. Fitting Instructions A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten every 300mm, rub the trim into place and nail through the top of the trim into the decking. Do not nail through the front of the trim. If a ladder is likely to be leaning up against a B type trim for regular access to the roof, the trim will need to be reinforced to avoid deformation. The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced with an extra layer of GRP laminate and then tissue to maintain a smooth finish. Alternatively, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid. This trim is compatible with the A200 Drip Roofing Trim. View all of our Fibreglass Roofing Trims A. Whilst we would recommend GRP Trims with a fibreglass roof (the fibreglass will bond better). If you decide to use lead or metal trims, ensure the lead or metal is clean and free from contaminates. Use G4 sealer when overlapping with the fibreglass.
About FibreGlassDirect:
FibreGlassDirect is an online shop which supplies quality, fibreglass raw materials to the UK and Ireland. We are based in Leeds, West Yorkshire and our Head Office is in Newry, Northern Ireland.
We have been online since 2009 but have over 60 years of experience as part of the Tricel Group.
We offer an extensive range of resins, topcoats, gelcoats and ancillaries for a wide range of industries. Some of our key supplies are used for Fibreglass Flat Roofing, Fibreglass Ponds, Boat Repairs and Castings for Decorative Items.
Phone:
+44 (0) 28 4175 3738
Email:
sales@fibreglassdirect.co.uk
Location:
Milltown Industrial Estate, Unit 4, Greenan Road
Warrenpoint
BT34 3FN
