Specification & Dimensions Fabricated of grade 304 stainless steel alloy 18-8 Two units equal one set Railing Measurements: 450mm x 450mm Tubing is 32mm diameter x 18 gauge (1.2mm) Flange is 3mm thick and shall be Heliarc welded to tubing with a continuous concealed beadand shall have three (3) 7mm diameter mounting holes Cover plates to conceal flange and fixings are 22 gauge (0.8mm)stainless steel Fully welded construction finished in satin stainless steel finish to promote durability and reliability Designed for the safety, security and convenience of the physically disabled Strong Ø75 fixing flanges Easy to install on most building surfaces Grab Rails provide flush mounting flanges which are fully welded to the tube ends This results in a single structural unit that is designed to give maximum strength, security and user confidence to support greater loads Attractive stainless steel cover plates to conceal the flange and fixings Recommended Instalation Height: To comply with Australian Standards AS 1428.1, grab rails must be fastened a minimum distance of 800mm from the floor, with 600mm of clear space above the rail and to with stand a force of 1100N at any point from any direction.
Visit Product Page
