“Great product and aligns perfectly like all Kaon stuff!
My 150 has an ARB Deluxe Bullbar so few tweaks had to be made. Definitely trim washer bottle cover as per instructions on 150 as well as on FJ - easy to remove (M6 bolt, push in clip through guard liner & pull down off pin). Easy trim with hacksaw blade & follow dimensions as per video for cut size as this worked out spot on.
When removing side bullbar bolts, the side plates may spring out slightly or drop as mine did, so it’s is a bit more challenging to make sure all the holes line up and you may need to use a bar to pry up the plate as much as possible in order to make the holes align – probably the most challenging part of this fitment if the plate moves.
The bottom attachment bolt for the bullbar side splash guards or wings is an M8 25 mm. However with the recovery points in place there is not enough clearance for this bolt and I used an M8 16mm instead.”
What do you like about this product?
Easy Install, Discreet, Strong, Clear Instructions
“Fits up to car perfectly haven't tried yet but look very strong .Very happy there was no need to remove bull bar to fit .thanks again kaon for a well engineered product”
What do you like about this product?
Design, Quality, Usefulness, Fit, Strong, Clear Instructions, Looks Great
“I haven’t used these for a recovery yet but they are a solid chunk of steel that should perform really well. Fairly easy to fit. I have chosen not to have a bull bar so this will allow recovery from the front. The only limitation is the angle with the factory bumper, but that’s not really the fault of the KAON recovery points.”
What do you like about this product?
Design, Fit, Discreet, Strong, Included Hardware, Australian Made
“I helped a mate install on my Prado without ramps or a lift. There was plenty of room, just steer to suit and the remote spacers worked a treat. Only issue - not enough room to use the torque wrench but will deal with that soon. Otherwise an easy install but not yet tested in anger. A very solid product and I have great confidence in the product.”
What do you like about this product?
Quality, Easy Install, Fit, Compatibility, Discreet, Included Hardware, Clear Instructions, Australian Made
“the tow points look great on the vehicle. fitting instructions were good both the paper ones that come with the product and the you tube video that can be accessed.”
What do you like about this product?
Design, Quality, Strong
“The product is very good however fitting of the rear bolt is a bit of a nightmare if you don’t have a hoist to get good access. I have not been able to do it Lyon my back under the car. Going to take it to a workshop to see if they can do it”
What do you like about this product?
Design, Innovative, Quality, Durable, Usefulness, Easy Install, Strong, Clever, Included Hardware, Clear Instructions, Australian Made, Looks Great
“These are by far the best engineered recovery points available for an FJ Cruiser.
They are not cheap, and shipping to the USA is costly, but I knew these were the only ones I would feel confident using.
They fit perfectly and the install is quick.
Kaon made payment and shipping to the USA easy and were very quick to return emails and answer questions.
I have several accessories made by Australian companies now and the quality on everything is at least as good as USA made items.
I look forward to doing business again.”
