“Externally looks good, however when unscrewing the screws that lock each wire into the rear of each of the connectors, I found that the connector socket was thin, resulting in the screw having to be fully removed from the threaded section in order to allow the end of each wire to be pushed into the socket, which was not tight in the surrounding moulding, and rotated when trying to insert the screw back into the thread. After quite some frustration I finally managed to get the locking screws back into the thread. This has not been a problem for me with other brands of these connectors. Also whilst the LED lights are a good idea, there is not enough room in the socket to also insert the LED wire. The screw cap on the cable entry is a good idea.”
