I purchased a 3x5 pedestrian gate. The quality was good and the price was good. However, the drawings were mostly about the dimensions of parts and not about assembly or installation. Most of the assembly was straight forward but the self taping screws intended to hold the six pickets did not work so I drilled out the holes in the pickets. Also, the distance between the posts is critical to the install but it's hard to notice (39") in the drawings. I spent a lot of time trying to figure it out. Finally, the weakest design issue is the use of two piece posts. The gate will have movement due to the posts. If you torque the bolts holding the two post parts, you may almost get the movement to stop but it is not a good design.