It's a Beckwood 7'x5' apex shed. The instructions are as minimal as they could be with timbers not labelled Basically I'm wishing I'd just bought the flats and timber and made my own, I'll know for next time. Everything is as thin as the manufacturer could get away with, the tongue and groove floor isn't solid enough, so I'm going lay another sheet on top, the 8mm roof is pretty thin 12mm would have been more suitable, and there are plenty of gaps in the flats themselves. I've added extra timbers under the eaves as well as reinforcement along the inside of the walls which has improved the structure for less wobble. Don't be fooled by the lovely photos, solid is not the word.