I really great case that almost fits perfectly. All the ports line up nicley and give you access to all the Pi 3 B+, including the sd card slot. The screws provided work with the supplied lid, however they are too short if you add a 10mm spacer. I did find fitting the Pi 3 B+ board a bit tricky as it was fractionally too big for the case. I found that inserting the board audio jack side first and then easing it in place worked best. It did need a little help with a screwdrive to lever it in place next to the LEDs. I used two 10mm spacers and found that electrical socket/light switch screws fitted so long as I opened up the holes in the lid a little with a drill bit. I also drilled holes in the 10mm spacers for additional ventillation